Hoist Line Simulator v4

10 stages 3 hoists 0.0 JPH 0s cycle

Basic Settings ▲

Number of Stages

10 process stages

Number of Hoists

Recommended: 3 | Max: 5

Max stages/hoist: tanks

Tank Centre-to-Centre SpacingiDistance between the centreline of this tank and the next tank. Directly controls hoist travel time between stations.

Total line: 10.8 m

Lift HeightiVertical distance the hoist must travel to clear the tank rim and safely travel to the next station. Includes immersion depth, part height, rack geometry, and safe travel clearance. Not necessarily equal to tank depth.

Lift time: 6.0s per move

Vertical Speed (physics fallback)

m/min

15.0 m/min · 49.2 ft/min

Lateral Speed (physics fallback)

m/min

30.0 m/min · 98.4 ft/min

Carrier Tilt Angle (for drip)

Degrees:

Carrier tilts at this angle during drip phase

Motion Settings ▼

Vertical Motion (multi-phase) ▼

Timing ▼

Production Requirements ▼

Stage Configuration ▲

#	Name	ProciProcess Time (Nominal) Target time the carrier remains in this tank. The hoist will not remove the carrier before the minimum process time (nominal × 0.9 by default).	DripiDrip Time Time the carrier is held above the tank after lifting, allowing liquid to drain back. Carrier is tilted during this phase.	Type	Pitch

Save / Load ▼

Side View

Front View

Top View

Cycle Chart

🔍

Live History: 0s

⚙️ Admin Dashboard

Generate Licence Key

Issued Licences